Bug-o-systems Modular Drive System Bedienungsanleitung PDF herunterladen (Seite 42)

SEMI-FLEX RAIL

SEMI-FLEX RAIL can be bent inside or

outside to a minimum radius of 15' (4.6 m)

or 30' (9.1 m) diameter without permanent

deformation.

AFR-3000 SEMI-FLEX RAIL replaces the old AFR-1000, 1010, 1020 and the later AFR-2000 rails. All the

rack-mounting holes on the AFR-3000 Semi-Flex Rail are slotted so that the rack can slide along the rail.

The length of the slots has been increased so that the rails can now be leapfrogged around a complete

circle. The tension of the screws holding the rack on the rail is adjusted so that the rack can be moved along

the rail with the AFR-2001 Rack-Adjusting Tool.

NOTE: Use at least four attachments (magnets or vacuum cups) on each SEMI-FLEX RAIL.

CAUTION: Bending beyond the recommended 15'-0" (4.6 m) radius may put

a permanent bend in the rail and break off some of the rack screws.

ITEM QTY PART NO. DESCRIPTION

1 16 AFR-1015 Spacer Washer

2 1 AFR-2001 Rack Adjusting Tool

3 1 AFR-3002 Splice Plate

4 1 AFR-3006 Rack

5 1 AFR-3009 Extrusion, Punched

6 2 FAS-0855 Flt Hd Soc Scr 1/4-20 x 1/2

7 2 FAS-0955 Flt Hd Soc Scr 1/4-20 x 1/2

8 16 FAS-1446-HW S.T. Slotted Hex w/Washer 10-32 x 5/8

9 16 WAS-0230 #10 Washer

PARTS LIST

A 2.75" (70mm)

B 4.0" (102 mm)

C .33" (8.5 mm)

D .500" (12.7 mm)

AFR-3000 / SEMI-FLEX RAIL

MIN. RADIUS

15' (4.6 m)

(2.37 m)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 56 57

Keine Kommentare

Bug-o-systems Modular Drive System Bedienungsanleitung Seite 42